材质均采用进口PE材质经滚塑技术加工而成，达到的目的。技术方面，我们借鉴外比较成熟的滚塑工艺，通过明火烧制一次成型，避了在使用过程中造成的因渗水而造成拦污排下沉的情况，并且每个浮筒内部都是进行了泡沫填充理，及时使用年限过长，或者外力原因造成浮筒本身破损，也不会影响拦污排本身的使用效果，produces anti-fouling and drainage products in accordance with environmental protection requirements. All materials are processed with imported PE materials by rolling plastic technology to achieve the goal of environmental protection and pollution-free. In terms of technology, we draw lessons from the relatively mature rotational molding technology abroad, through the open fire firing once molding, avoided the situation which caused by the water seepage to cause the sewage to sink and sink in the process of using, and all the buoys were filled with foam, in a long time, or the external force causes the buoy itself to be damaged, and it will not affect the use of the barrier. As a result, since 2012, the company has completed a large number of Engineering cases, as long as you inform you about the water flow, flow speed and span of the hydropower station, you can provide a high-quality program, and can inspect the scene and old customers use the scene case diagram!